Seeed Studio Happy Holidays & New Arrival: Dual/Quad SATA HAT for Raspberry Pi 4 or Rock Pi 4

Here is a HAT for Raspberry Pi and Rock Pi 4 which you can use the SATA port HDD to extend your Pi storage. 

For 3.5inch HDD setups, a standard ATX PSU is required to power the HDD´s and the Raspberry Pi. With 4x 3.5inch HDD´s the PSU should provide at least 60W or more.

To fully take advantage of the 5th SATA port, an eSATA connector was implemented which can be exported e.g. out of the case. The eSATA connector provides both data and power. It can directly drive a 3.5inch HDD via a single cable.

The Penta SATA HAT is powered by the JMB585 with 2 5Gbs PCIe buses with up to 10Gbps bandwidth. With 5 SSD's configured in Raid0 mode, an archiving speed of up to 803MB/s can be achieved.

Power-Over-Ethernet (PoE) HAT for Raspberry Pi 4B/3B+ $24.95

• This PoE Hat for Raspberry Pi supports active PoE which includes IEEE 802.3af and 802.3at PoE standard protocol.
• As a matter of fact, there is a "handshake" between PSE(Power Source Equipment) and PD(Powered Devices) and the PD will not apply the power supply if the supplied voltage is not matched.
• Quite safe for your Raspberry Pi.

Grove - High Precision Barometric Pressure Sensor (DPS310) $5.90

Grove - 8 Channel I2C Hub (TCA9548A) $5.90

• We've already released the Grove - I2C Hub (4 Port) and the Grove - I2C Hub (6 Port). Wait, still not enough? Well well, we know you are seeking more. Here you are, we present you the Grove - 8 Channel I2C Hub. 
• Grove - 8 Channel I2C Hub is based on the TCA9548A  I2C multiplexer chip, support the expansion of 8 I2C devices with the same I2C address.

Experimental Platform for Raspberry Pi/Arduino $5.95

• This Experimental platform is easy to carry on and assemble with Raspberry Pi and Arduino boards like Raspberry Pi 4/3b+/3 and Arduino Uno/Mega.  
• This experimental platform is easy to assemble and carry on, and the Raspberry Pi and Arduino interfaces like TF port, HDMI port, and power port are available on the platform which means you can easily plug all the interfaces on the board with this experimental platform. 

SeeedStudio Piboxy Case for Raspberry PI $9.98 after code  

Quick Starter Kit for Raspberry Pi 3 Model B $15.60 after code 

2.8 Inch USB TFT Display Module For Raspberry Pi $18.20 after code

Pimoroni Mood Light - Pi Zero W Project Kit, internet-connected $15.60 after code 

How to build a Raspberry Pi 4 NAS Server? – Samba and OMV
This project is perfect for you! With the improved processing speed and performance of the Raspberry Pi 4 together with USB 3.0 and Gigabit Ethernet, you can build yourself a neat NAS Server at a cost-effective price.

Raspberry Pi Tutorials – Guides and Projects

Merry Christmas! Here we prepared all Raspberry Pi tutorials and guides to help with your next Pi projects! 

Learn Arduino – Tutorials and Projects

Merry Christmas! Here we prepared all Arduino tutorials and guides to help with your next projects! 

How to build an Arduino Robot? Kits and Projects to get started

Want to know how to build an Arduino robot? This guide shows you the kits, and projects to help you easily get started in building one!

In the past, building robots was an expensive and tough task to handle due to the vast number of parts and experience needed. However, with the availability of Arduino and the kits, arms, and parts that go alongside it, robotics is now a fun and exciting process that’s very much affordable!