 | | The reComputer R1000 is a high-performance industrial Raspberry Pi gateway and edge IoT controller designed for smart building and energy management applications. Built on the robust Raspberry Pi CM4 platform, it boasts a quad-core A72 processor for smooth operation and supports up to 8GB of RAM and 32GB of eMMC storage for demanding tasks. |  | Raspberry Pi M.2 HAT+ is an official M.2 connector accessory for the Raspberry Pi 5, supports the connection of M.2-format PCIe and NVMe devices to the PCIe FPC connector on Raspberry Pi 5. | |  | | The Grove - 8-Channel Solid State Relay is based on the high-quality G3MC202P module, which allows you to use a 5VDC to control MAX. 240VAC. |  | reServer is based on an ODYSSEY X86 v2 board and powered by Intel® Core™ 11th Gen. i3 and Intel UHD Graphics 48EUs (400 - 1250 MHz), which delivers high CPU and AI performance for various applications. It has two high-speed 2.5-Gigabit Ethernet ports and supports hybrid connectivity including 5G, LoRa, BLE and WiFi. | |  | | It is a digital normally-open switch that can handle the current up to 5A at 250VAC for long periods of time. When the relay is switched on, the LED will light up and the relay will allow current to flow. The peak voltage capability is 250V at 10A. It is widely used in remote control, telemetry, communication, automatic control, mechatronics, power electronics and other fields. |  | Base Shield provides a simple way to connect with Arduino boards and help you get rid of breadboard and jumper wires. With the 16 on-board Grove Connectors, you can easily connect with over 300 Grove modules! The pinout of Base Shield V2 is the same as Arduino Uno R3. | |  | | SenseCAP S2110 Sensor Builder is a quick tool for IoT developers to build IoT sensors and applications and a custom open-source LoRaWAN device with low development cost. |  | | ADC is a common accessory for Raspberry Pi. Nowadays many cheap MCUs has built-in ADC, so we make this 8-channel ADC based on STM32F030, which is a cost-effective, low-power ARM Cortex M0 MCU. | | Check out our wiki guidance about reComputer J401 carrier board interface usages before you get started with your Edge AI development. See how to connect and utilize 260 Pin SODIMM, CSI cameras, RTC, M.2 KEY M, M.2 KEY E, UART, and I2C.
Discover CSI camera list compatible with Jetson Orin NX/Orin Nano: | | AI meeting assistant powered by reComputer J4012 Jetson Orin NX, now you can transfer voice to text with NVIDIA RIVA service through reSpeaker, then use Ollama Llama3 for proper response generation based on text version. To retrieve all key points from a previous meeting contents on one specific date, we utilize Llamaindex with RAG to help summarize abstracts for more efficient management.
Get experience of the demo through our GitHub repo | | | Large Language Models (LLMs) with the reTerminal DM | | Meet Q8, a Tiny Quadruped Robot Powered by XIAO ESP32C3 Created by Yufeng Eric Wu, this is version 1 of project Q8, a miniature quadruped robot powered by 8 Dynamixel motors and a Seeed Studio XIAO ESP32C3. | | To kick things off, we have listed all our Seeed Studio XIAO Boards and most of the XIAO Accessories in the AliExpress shop. At the same time, we are always looking to expand our product offerings and better serve our community. Let us know what products you want us to list in our AliExpress shop. Leave a comment with your suggestions and we’ll definitely prioritise your choices here: | | | | |
