Seeed Studio 👀 See What Everyone is Raving About🌴 Learn More on our Wiki- One Stop Model Training with Edge Impu

Pin Tweet Share Share
From: Seeed Studio - Thursday Apr 13, 2023 02:04 pm
👀 See What Everyone is Raving About🌴 Learn More on our Wiki- One Stop Model Training with Edge Impulse✨CAN Bus Family in Seeed! 
The Ochin_CM4 kit pairs a powerful Quad-core Cortex-A72 CPU and GPU Raspberry Pi CM4 module with an Ochin_CM4 carrier board. With 2GB LPDDR4 RAM and 32GB eMMC, it's perfect for robotics, home automation, and IoT projects requiring substantial memory and processing power.
RS485 Modbus Dissolved Oxygen Sensor is based on the fluorescence quenching method to measure dissolved oxygen in water, with a range of 0~20mg/L or 0-200% saturation, making it a terrific choice for water quality monitoring, aquaculture, wastewater treatment, and other fields.
It is built with Jetson AGX Orin 32GB Module, offering 200 TOPs AI performance as well as a carrier board including PCIe X16, GbE, 10GbE, 3* USB 3.2, HDMI 2.1, M.2 Key M, M.2 Key E, 2.4/5GHz Wi-Fi, Bluetooth, 16 lane MIPI CSI-2, 40-Pin header. The kit is the perfect alternative option for the Jetson AGX Orin Dev Kit.
S500 5-in-1 Compact Weather Station measures air temperature🌡🥶, relative humidity💦, barometric pressure, wind speed💨, and wind direction (ultrasonic)🌀. It is ideal for application in a rough environment like the outdoors, agriculture, or smart cities.
The Human Static Presence Module Lite is a mmWave radar sensor with an integrated antenna based on the FMCW principle. With user-friendly configuration and debugging tools and flexible parameter adaptability, it is a cost-effective solution for human presence detection, supported by Arduino for easy integration into various applications.

The reComputer J4012 is powered by Jetson Orin™ NX 16GB module with 100 TOPS AI performance. It includes a range of IOs such as USB 3.2, HDMI 2.1, M.2 Key E for WiFi, M.2 Key M for SSD, and more. With a pre-installed JetPack System and an aluminum case with a cooling fan and heatsink, it's ideal for developing and deploying AI applications in various scenarios.
Seeed Studio XIAO ESP32S3 leverages 240MHz Xtensa 32-bit LX7 dual-core processor, supporting both WiFi and BLE 5.0 wireless connectivities, allows for deep sleep mode with power consumption as low as 14μA while supporting lithium battery charging management. Ideal for the Internet of Things, Smart Homes, Wireless wearable devices, Robotics, etc.
NVIDIA® Jetson AGX Orin™ 64GB Dev Kit offers a giant leap forward for Robotics and Edge AI. With over 275 TOPS of AI performance, power configuration between 15W and 60W, and a compact form factor, it provides more than 8 times the performance of its predecessor. Bigger memory capacity at the same price as the 32GB Dev Kit.
The Arduino UNO is the best board to get started with electronics and coding. The Arduino Uno Rev 3 is a microcontroller board based on the ATmega328, an 8-bit microcontroller with 32KB of Flash memory and 2KB of RAM, which is the most used and documented board of the whole Arduino family.
The reTerminal is a Human-Machine Interface facility, designed in modularization, offering multiple interfaces and components. It is a hand-size, powerful, Raspberry Pi-based all-in-one board, assisting you to develop individual IoT & AI projects and being ready to materialize industrial-level monitor and control functions.
SenseCAP A1101 is an AI sensor with image recognition capabilities. Combining TinyML AI and LoRaWAN transmission, it provides a low-power, high-performance solution for indoor and outdoor applications.

#Wiki📑: Fully supported by Edge Impulse, One Stop Model Training with Edge Impulse 
Using an outdoor smart sensor - A1101 to detect the accumulation of leaves, flowers, and other debris for a balcony drain and alert its user.

🌄>>Explore More 
#Event🎉: CAN Bus Family in Seeed
CAN stands for Controller Area Network, it is used to allow microcontrollers and devices to communicate with each other within a vehicle without a host computer which allows for control and data acquisition. These devices are also called Electronic Control Units (ECU) and they enable communication between all parts of a vehicle.

Specifically, CAN FD offers three benefits (vs Classical CAN):
  •  It enables data rates up to 8 Mbit/s (vs 1 Mbit/s)
  •  It allows data payloads of up to 64 bytes (vs 8 bytes)
  •  It enables improved security via authentication
🌄>>Explore More CAN FD 
Facebook
Twitter
Discord
LinkedIn
YouTube
Copyright © Seeed_2023, All rights reserved.
You're receiving this email because you have subscribed to us. Hope you like the Seeed products!
Get to know our new products and what's going on at Seeed for the first time! 
Want to change how you receive these emails?

You can
 update your preferences | unsubscribe from this list.

Contact Us :
order@seeed.io
www.seeedstudio.com






This email was sent to newsletter@gmail.com
why did I get this?    unsubscribe from this list    update subscription preferences
Seeed Technology Co.,Ltd. · B608, Design Commune, Vanke Cloud City, Dashi 2nd Road · Nanshan District · Shenzhen, Guangdong 518055 · China

© Copyright.